Hardver White UPVC Door Handles Set Lever/Lever Pro Linea 92pz – 122mm Screw to Screw – Upvc Door Handle – Modern Design

$56.99

  • MEASUREMENTS – 122mm from Screw to Screw – 212mm x 34mm Backplate – 92mm PZ (Centres) From Centre of Keyhole to centre of Door Handle Spring – Please check these crucial measurements to ensure these Handles are suitable for you. Full Measurements are in the line drawings in the images.
  • QUALITY TESTED – 122mm from Screw to Screw – 212mm x 34mm Backplate – 92mm PZ (Centres) From Centre of Keyhole to centre of Door Handle Spring – Please check these crucial measurements to ensure these Handles are suitable for you. Full Measurements are in the line drawings in the images.
  • ANTI RUST COATING – The white replacement upvc door handles have been salt spray tested for over 240 Hours, which proves they are hard wearing and the quality finish will last the test of time. Suitable for fitting in Coastal Areas where high salt content would normal damage handle finish.
  • LEFT OR RIGHT HANDED – Levels fully rotate so the Handles are suitable for Left or Right Handed Doors.
  • WHATS IN THE BOX – 1x Pair of white Handles 1x Pair of Spring Cassettes (Fit with these for Sprung Handles or without for Un-Sprung) 2x Sets of Fixing Bolts (1x Long and 1x Short, use the appropriate length depending on door thickness for an easy and convenient installation) 1x 8mm Door Handle Spindle

Out of stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Description

Hardver uPVC Door Handle Set, 92PZ – 122mm Screw to Screw High Quality Door Handle – Modern Design Exterior Door Furniture Set (Inside Out Lever) for Euro Design Key Cylinder (Light Bulb Cylinder) This handle adapts to uPVC doors Featuring the lift-to-lock multi-point locks on the side of the door. levers are. Be Sure It Fits Not all handles will fit all multi-point mechanisms. Before ordering, check the distance from the center of the spindle to the center of the cylinder barrel (PZ), and the distance between the mounting bolts. If the top bolt of your hand grips is below the lever grip, then this will fit as your grip is only available in one size for this type of grip. Center of Spindle to Center of Cylinder Barrel = 92mm (PZ 92) Distance Between Mounting Bolts = 122mm Notes:* 100,000 test cycles refers to a handle properly fitted to a door with opening/closing movement = 1 cycle.Can be used be used in coastal environments and high traffic areas such as public buildings and hotels. Please note that special cleaning is not necessary as the dirt can be cleaned with a damp cloth. The use of caustic cleaning agents or chemicals should be avoided.

Additional information

Weight 0.39 kg
Brand

Hardver