Description
EPLZON Carbide Rotary Burr Set
????Specifications：
????Data: Head Dia.: 6mm.
????Head L.: 5 to 12mm.
????Head Spiral Flutes Qty.: 14.
????Head Material: Tungsten Carbide.
????Head Hardness: HRA90.
????Shank Dia.: 3mm.
????Shank L.: 38mm.
????Shank Material: 40Cr.
????Overall L.: 42 to 51mm.
????Max Rotation Speed: 70000RPM.
????Cut Style: Double Cut
????Direction of Rotation: Right Hand/Clockwise
????Feed Direction: Generally counter-rotationally or with a swinging motion.Direction of rotation to get fine finish.
????Optimal Drive Tool: Straight, Angle Die Grinder, Robot.
????Average Drive Tool: Drill, Drill Press.
????Drive Type: Air or Electric Rotary Tool.
????Optimal Fix Type: 3mm or 1/8″(3.175mm) Collect and Nut
????Average Fix Type: 3-jaws Chuck.
‼️NOTE:
1.Always wear ear, eye, face protection and protective safety gloves.
2.Generally, for rough work, move the burrs across the workpiece counter-rotationally.
3.Pass the tool over the workpiece in the direction of rotation to achieve fine finishes.
4.Min Clamping depth is 2/3 of the shank, if you have to clamp less, pls low speed.
5.If rough running, strong vibrations and increased flying sparks, pls use a new one.
6.Do not apply too much pressure, Let the speed do the work. Smaller burrs require faster speeds.
7.Soft materials, such as aluminum, use a grinding oil to reduce debris clogging. Grind glass, use water as lubricant.
8.Elongate holes, grip tool firmly with two hands and use a swinging motion, which prevents chatter, result in a safer cut.
9. Avoid impact loads, otherwise parts teeth will break off, shank will bend. Do not sink the burr for more than 1/3 of its periphery.
10.Recommendation for drives: shank 1/8″ (75 to 300W), shank 1/4″ (from 300W), for coarse cuts, 500W+ advantageous.
✅Package include：
1*10pcs Carbide Rotary Burr Set