Description
This universal receiver is compatible with the following Hörmann remote controls: Hörmann HSM2 / HSM4 / HS1 / HS2 / HS4 / HSE2 / HSD2 / HSP4 868 / HSZ1 868.3 MHz. DANGER!!! Not compatible with BiSecur (BS) handheld transmitters! Only compatible with the channels listed above. 1. Brand selector switch: with 8 DIP switches, user can make different combination for different brands of remote control. The brand selection list can be found in the included instructions. For Hörmann 868.3Mhz remote controls, push the DIP switches 4,5,6,7,8 up. 2. LEARN button and LED: There are 2 independent channels. Each channel has an independent learning button S1, S2. 3. Power input selector switch: This receiver works with AC/DC 12V ~ 30V. Shorten jumpers 1 & 2 for 12V power supply; Shorten 2 & 3 for 24V power supply. 4. Programming process: a) For Hörmann 868.3Mhz remote controls, push the dip switches 4,5,6,7,8 up. b) Press the learn button. The Will LED lights up. c) Press the desired button on the Hörmann remote control. The LED will start flashing, which means the remote control has been successfully programmed. 5. Clear all data from the receiver’s memory: Press and hold the Learn button. The LED starts flashing. Press and hold the Learn button until the LED turns off. All saved remote controls will be permanently deleted and cannot be restored. Technical data: Frequency: 433 – 868 MHz (rolling code/fixed code) Channels: 2 Power supply: 12-24 V AC/DC (power supply not included) Hand transmitter memory per channel: 200 If you set the range of the remote control reception to 150-200 If you want to increase meters, you can connect this antenna: https://www.store.de/dp/B01MZYAPVN/