Description
Product features: The durable, micro-prismatic, retroreflective 983 series has been developed around vehicles according to UN/ECE 104 for increased visibility and attention with a contour. The 983 series is for bonding to solid Surfaces coated with a permanent adhesive. The film is resistant to petrol vapours and occasional spilling of fuel. It reflects even when wet. Processing instructions: Which surfaces can be glued on? – Fixed constructions. – Smooth surfaces. – Paint, glass, metal (aluminium). – Plastic (possibly with pre-treatment). – Tarpaulin structures. – New tarpaulins, not older than 6 months. – Tarpaulins are difficult surfaces. (Flexibility, plasticiser, paint application, dirty). – Bonding only on tested surfaces. – Cleaning vehicles with contour marking. – Cleaning without the use of steam high-pressure cleaners. – Do not use agents that have a grinding effect (e.g. nylon brushes). – Do not use solvents (e.g. colour thinner). – Test detergent beforehand. – When using steam high-pressure cleaners. – Maximum pressure = 80 bar. – Maximum temperature = 60 C. – Minimum distance of the cleaning nozzle to the surface = 30 cm. – Maximum deviation of the cleaning jet from the right angle. To the substrate = 30. – Please note the manufacturer’s information for the steam high-pressure cleaner.