Description
MOULD PROTECTIVE has been specially formulated for application to mould surfaces after their use to remove any surface moisture and to protect the mould against corrosion during storage. FEATURES Does not contain silicons Temporary conservation of metal parts during storage Protects metals and alloys Displaces and seals out water and moisture Safe on all metal surfaces – does not stain Safe on most rubbers – plastics and coatings Easily moulded off Test on sensitive or stressed materials before use. APPLICATIONS All injection mould tools – blow mould tools – extrusion dies and metal components requiring corrosion protection. DIRECTIONS Shake well before use Stir or mix bulk products well before use Repeat frequently during the application Use only with adequate ventilation Apply to a clean – dry surface Clean the aerosol valve by turning the can upside down and spraying until only propellant escapes A safety data sheet (MSDS) according to EC Regulation No. 19072006 Art.31 and amendments is available for all CRC products PRODUTCT DATA (WO Propeller) Color Yellow Odor Solvent Density 0.740 (@ 20C) Flash Point – 4 C salt spray resistance active product 100 h