Description
SEALS AS STEEL is an Ultra heavy duty scientifically advanced formula that permanently seals the heaviest of cracks and leaks in head gaskets, engine blocks, cracked and warped heads. It also seals leaks in radiators, core plugs, heater matrix, water pumps and thermostat gaskets. You simply add SEALS AS STEEL to the cooling system and run the engine for 20 minutes only! SEALS AS STEEL is a break through especially when it comes to repairing leaks in; aluminum heads, larger cracks than normal and back pressure from the cylinder head. Whilst it will work in ALL TYPES of engines, it is especially suitable for BMW’s, Range Rover’s Vauxhall’s, Fiat’s, Renault’s, Rover’s, Peugeot’s and other makes and models with or without aluminum heads. A permanent repair solution that saves hundreds of pounds in expensive repair bills. To date there has been nothing reliable known to repair head gasket leaks like “SEALS AS STEEL”. The chemical composition of SEALS AS STEEL is a “scientifically advanced formula” ensuring a head gasket repair even when it looks impossible, leaving competitor’s products years behind. How does it work? When SEALS AS STEEL is added to the cooling system it forms a permanent molecular bond that is strong as steel, sealing cracks and holes in all types of engines including; cast iron and aluminum engine blocks, suitable for all petrol, diesel, hybrid and LPG engines in cars, vans, trucks, motor homes and agricultural equipment. ‘SEALS AS STEEL’ works by chemical reaction to perform a permanent repair. The welded area becomes heat resistant to high temperatures and lasts the life of the engine. It will repair the heaviest of head gasket, head and engine block leaks even if other products have failed that you previously tried. SEALS AS STEEL has been tested independently by ‘Amalgatech Laboratories, Arizona, USA’ to meet stringent ‘ASTM International’ standards. Instant Repair Unlike many other products, no need to run your vehicle for hours to seal your vehicles head gasket/cylinder head leak. You only need to run it for 20 minutes for a permanent & fast repair.
INSTRUCTIONS: (1) Flush cooling system thoroughly if antifreeze is present. (2) Fill cooling system with clean water and run engine until normal operating temperature is reached then switch off engine.(3) Turn heater switch to full temperature but do not put the fan on. (4) Using extreme caution, remove radiator or expansion tank cap.(5) Shake HYPER-SEAL ULTRA bottle THOROUGHLY and slowly pour into the radiator or expansion tank, add water as required to reach normal level. (6) Replace cap and run engine for approximately 20 minutes. (7) Turn off engine and allow engine to cool before removing radiator or expansion tank cap. 8. Drain cooling system thoroughly. (9) Allow vehicle to sit for 4 – 5 hours. (10) Connect hoses and refill cooling system, antifreeze can now be added.