Description
The new TTulpe C-Meister 13 P30 Eco is the successor of the popular C-Meister 12 P30 gas water heater model “C-Meister” can be installed indoors and is a 13 liters per minute model. The C-Meister is a direct-vent, modulating constant temperature gas water heater. The C-Meister models comply with Ecodesign Directive 2009/125 / EC and have the lowest NOx emissions in the market. Self-modulating flow sensor technology regulates the amount of energy required to heat the water needed. This provides a considerable energy saving. The C-Meister 13 Eco is a balanced flue, room sealed gas water heater. This is the safest type of gas water heaters available in the market. The fresh air inlet comes from outside and the exhaust gasses are pushed outside. This makes it possible to mount the water heater in any (bath-) room without restrictions in the whole European Union. The temperature is controlled by thermostats. Automatic safety controls are fitted to the water heater to provide safe and efficient operation. The device has a digital display and simple touch operation. The temperature can be set on the display. In addition to the temperature, the water flow is also displayed on the display. The TTulpe C Meister 13 Eco is suitable for replacing your old water heater, kitchen-, bath- or shower- instantaneous water heater. But also as a new hot water supply in your apartment, tiny house, cottage or mobile home. Maximum power consumption is a mere 52 watts, so this appliance can be used on a 12v system with a small inverter, in installations such as narrowboats, horseboxes, log cabins and shepherd huts. – Gas type: propane, butane or LPG – Gas pressure: 30 mbar – Max output Power: 26 KW – Connection: 220-240 Volt – Max. power consumption: 52 Watt – Nominal Output power: 22,5 kW – Frost protection system: No – Size: 350x640x185 mm (wxhxd) – Minimum water pressure: 0,5 bar- Maximum water pressure: 8 bar – Water flow: between 3 and 13 liters per minute.