Description
Goodyear Professional Tyre Pressure Gauge Main Features: -Stem has a release button to ensure the air stays in the tyre -Measures in both PSI (from 0 to 60 psi) and BAR (0 – 4 bar). -Fitted with a 45 degree angle chuck to allow easy connection to tyre valve. -GS/TUV Approved and ANSI Grade B accuracy ( 2% accuracy). -Features a release button to allow the pressure to be accurately read away from the car and then reset later. Benefits -Save time and money by checking your tyre pressure at home rather than going to the petrol station or tyre shop. -Corrects your tyre pressure with extreme accuracy -Reduces tyre wear, extends tyre life and improves fuel efficiency -Improves vehicle handling and passenger safety Instructions: -For accurate results always check the pressure when tyre is cold -Push end of gauge firmly into tyre valve until pointer reaches highest point. -Read pressure from an angle vertical to dial face. -Refer to owners manual or door card/sticker for ideal tyre pressure for specific road conditions. Pressure marked on side of tyre is normally best. -In order to prevent fatigue. Push release button on gauge to eliminate inner pressure after use. -Always replace valve cap after use to prevent dust collection and leaking. Suitable for: -Cars -Motorcycles -Push Bikes (Schrader type valve) -Agricultural Vehicles -Lorries