Description
Specifications:Stick size: 7mm x 200mm /0.28″ x 7.87″(Diameter*Length)Softening Point: 100°CTotal Length：200mm/7.87″Description:Advanced, practical ,stability and strong viscosity design of this glue adhesive stick practical glue stick use in high temperature glue gun(not included)t for car paintless dent repair and more-toxic of this adhesive craft sticks. Widely used hot-belt adhesives in the world of high viscosity and drip-dryness to Use?1n the dent with a clean wet cloth;2t the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;3 a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;8. Clean the repaired place with a clean wet clothage Included:12 x Yellow Hot Melt Glue Sticks