Description
IV8C cctv tester monitor support CVBS + AHD (8MP) + TVI (8MP) + CVI (8MP) Camera Test. ( Not support IP camera test and VGA/HDMI input) Main Features: Built in High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display; Support PAL/NTSC standard video signal. CVBS testing. PTZ controller:Support Pelco-D / P PTZ control protocol, etc. , through RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size. Image generator: Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section DC12V 1A output power: Power the camera with DC12V (1A) power from the tester. Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable. Improvement cable test: UTP cable, telephone cable etc order and connectivity test, can save testing report TVI camera test:HD TVI video surveillance testing, support 1MP 2MP 3MP 4MP 5MP. When TVI signal input, the tester will display HD TVI camera image. CVI camera test:HD CVI video surveillance testing, support 1MP 2MP 3MP 4MP. When CVI signal input, the tester will display HD CVI camera image. AHD camera test: HD video surveillance testing, support 1MP 2MP 3MP 4MP 5MP. When AHD signal input, the tester will display the AHD camera image. LED lamp:It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate. The battery graphic display:The tester has advanced power control and protection circuit, low-power energy-savingPacking list 1*tester 1*Adapter 1*USB cable 1*Built-in battery 1*BNC cable 1*RS485 connector 1*Power output conversion cable 1*Audio cable 1*Tool bag 1* Instruction Manual