Description
BOND IT DRIVE ALIVE DECKING OIL provides your deck with a natural looking protection by replacing natural oils in the wood. It provides a protective barrier against water penetration where constant weathering can cause swelling and warping. Uses; Suitable for use on untreated, previously oiled or weathered decking. Preparation; Old Decking: Use DRIVE ALIVE DECKING CLEANER to remove any dirt, grease, oil, mildew and other contaminants. Remove any loose or flaking material. New Decking: The timber should be allowed to weather for a minimum of 6 months before using DECKING OIL. Splash some drops of water onto the wood, if water sits on the surface in beads, then the decking does not require deck oil. Application; Ensure that the decking is dry. Do not apply in wet conditions or if rain is imminent. Shake can thoroughly before use. Always test a small inconspicuous area prior to full application. Apply the first coat using a good quality brush or roller. Apply a second coat once the first coat is dry (approx. 6 hours). Leave 24 hours before subjecting to foot traffic. Clean Up: Clean brushes thoroughly in white spirit after use. Note: Not for use on new wood DECKING OIL should only be used to restore and treat weathered timber. Limitations ; Do not traffic until fully cured. Do not apply in wet conditions or if rain is imminent. Do not use in temperatures below +5oC and above +30oC. Coverage; 5 Litres will give 2 coat coverage for approx. 20m2 of decking. 2.5 Litres will give 2 coat coverage for approx. 10m2 of decking. AVAILABLE IN 2.5L and 5L Tins.
Note: Not for use on new wood DECKING OIL should only be used to restore and treat weathered timber. Limitations ; Do not traffic until fully cured.