Description
Specific Usage Method : 1. Because there are many gaps in the Chuck, you must Check the Residues in the Gaps of the Chuck and clean the Chuck with Gasoline or Detergent before Installing the Tools. 2. The Chuck and Gland are Installed on the Spindle of the Machine tool Together. Install the Chuck on the Shaft Taper Hole, Carefully turn the Clamping Spring, Push the Gland into the Chuck Groove, And Evenly Compress the Chuck. 3. After Cleaning the Auxiliary Handle of the Tool, Insert it into the Clamping hole. After Confirming that the Chuck is Aligned with the Tool, Tighten the Gland until the Tool is Clamped in Place Before use. 4. If you need to Replace the Chuck, Loosen the Chuck and Remove the Chuck and Cutter to Replace other Chucksifications : ◎ Material : Carbon SteelPackage Contains : ◎ 2 x 6 mm Engraving Machine Chuck ◎ 2 x 6.35 mm Engraving Machine Chuck ◎ 2 x 8 mm Engraving Machine Chuck ◎ 1 x 7 mm Nut ◎ 1 x 8.5 mm Nut