GeeekPi 4Pack 0.36" 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Raspberry Pi Arduino
GeeekPi 4Pack 0.36" 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Raspberry Pi Arduino - Image 2
GeeekPi 4Pack 0.36" 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Raspberry Pi Arduino - Image 3
GeeekPi 4Pack 0.36" 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Raspberry Pi Arduino - Image 4
GeeekPi 4Pack 0.36" 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Raspberry Pi Arduino - Image 5

GeeekPi 4Pack 0.36″ 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Raspberry Pi Arduino

$0.00

  • This module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.
  • Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
  • Digital tube: 4 common anode score points with 0.36 inches LED, red highlights;
  • Positioning holes: 4 M2 screws positioning holes for easy installation
  • Package Includes:4 x 4Bit-7Seg Digital Display Module,4 x 4Pin Female to Male Jumper wire;Technology support: https://wiki.52pi/index/4Bit-7Seg_Digital_Display_Module_SKU:_D-0007

Out of stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Description

Description:The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED. Features:Display of male red for the four digital tube Adjustable digital tube 8 gray Level control interface for 5V or 3.3V 4 M2 screws positioning holes for easy installation Specification:Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin; Digital tube: 4 common anode score points with 0.36 inches LED, red highlights; Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination; Package Includes:4 x 4Bit-7Seg Digital Display Module 4 x 4Pin Female to Male Jumper wire Wiki:https://wiki.52pi/index/4Bit-7Seg_Digital_Display_Module_SKU:_D-0007

Additional information

Weight 0.071 kg
brand

GeeekPi
dimensions

‏
:
‎
11.7 x 7.6 x 4.9 cm; 71 Grams
SKU: B088LQM8LN Category: Tags: , , ,