Description
The motherboard diagnostic card is also called a POST card (Power On Self Test) or a PC analyzer. It is a code that displays the motherboard BIOS self-test procedure. Specifications: System: for Windows 98 SE/ ME/ NT/ 2000/ XP / VISTA Size: Approx. 89mm x 82mm(L*W) Support for desktop computers With motherboard operating indicator; The use of patch components does not hurt hands; This card can be inserted into ISA or PCI; Plug in the wrong slot or reverse insertion will not burn any parts; Able to display the crash of repeated automatic reset under a black screen; You can diagnose the failures in the board without plugging in the CPU and other empty boards. Suitable for all computers with PCI or ISA interface. Introduce of run LEDS Only by some units and a few mainboard slot message , it could runs normally , and it has a low error percentum , If the card is plugged into the bad slot , the code stop changing , or the other LEDS is not light , but the run LED is quite possible to run normally . You can solve the following problems by the result “of if the run LED has lighted , the mainboard has ever ran”: 1 . The code of the card is bad 2 . The card is not fit for the mainboard which you using 3 . PCI slot or ISA slot is bad 4 . The card is plugged incorrectly or pins of card are dirty , or pins in slotrusted 5 . The mainboard stops working 6 . The mainboard is working on programs which is out of relation tocode Installation guide: Insert the diagnostic card into the PCI or ISA slot of the computer motherboard. According to the digital code displayed on the diagnostic card after turning on the power, you can check the meaning of the code in the “Instruction Manual” delivered, and you can know what part of the hardware is faulty. From now on, you don’t need to replace the monitor and graphics card The faulty components can be determined by successive generations of memory, memory, an