Description
Specification: Material: Stainless steel Color: Black Size: 13.5*3cmStep 1: Disinfect your roller and wash your face ✦Disinfect your derma roller by letting it soak in 70 percent isopropyl alcohol for approximately 5 to 10 minutes. Step 2: Begin derma rolling ✦Roll in one direction 6 to 8 times, depending on your skin tolerance and sensitivity, and make sure to lift the roller after each pass. ✦So, roll in one direction. Lift up. Repeat. After rolling in one direction, it’s time to go back over the area you just rolled and repeat the process in the perpendicular direction. ✦After you’re done microneedling, rinse your face with water only. Step 3: Clean your derma roller ✦Clean your derma roller with dishwasher soap. Create a soapy water mix in a plastic container, then swish around the roller vigorously, making sure the roller doesn’t hit the sides. The reason we use detergents like dish soap directly after rolling is because alcohol doesn’t dissolve the proteins found in skin and blood. ✦Disinfect your derma roller again by letting it soak in the 70 percent isopropyl alcohol for 10 minutes. Put it back in its case, give it a kiss, and store it somewhere safe: 1 to the different monitor and light effect,the actual color maybe a slight different from the picture color. 2se allow 2-3cm differs due to manual measurementkge Included: 1*Derma Roller