Description
Universal automatic switch 1.1 m thermoplastic (shatterproof) with high brightness for LB management insert “light” ref.-no. : 1701 SE, 1704 ESE, 1702 SE, 1710 DE, 1711 DE, 1713 DSTE, 1723 NE, 1708 IE. Intended use * Automatic switching of lighting during thermal motion and ambient brightness. * Operation with embedded insert for switching or regulating or inserting the satellite cable with 3 wires (LB-)* Mounting on the wall in installation entrance Product features: functions directly over the cover * Extension of the detection area in combination with satellite insert with 3 Wires * Continuously switched on, continuously switched off. Operation with a separate satellite button by three-phase insertion of the satellite button. * Adjustable runtime * Continuous power on, continuous power off * Switch on or off over 0.5 – 5 hours * Shut-off warning * Dynamic running time * Presence simulation * Alarm function * Timer function * Test operation * Programming up to 16 individual switching times in combination with an inset with an in. Plug switch * Short-term operation In combination with a dimmer insert * Ignition with last brightness or brightness stored * Hotel function * Night light function Technical data ambient temperature: ≥20 … +45 C Storage temperature / transport: 25 … +70 C brightness setting. approx. 5 … 500 lx (and daytime running light) Sensitivity: 0, 25, 50, 75, 100% Closing delay: approx. 10 seconds, 60 minutes, installation height: 1.10 m, detection angle: 180, detection range 25%: max. 8 m sensitivity 50%: max. 13 m. Sensitivity 75%: max. 26 m Sensitivity 100%: Max. 32 m. Radio frequency: 2402 – 2480 GHz. Transmission power: max. 2.5 mW (cl 2). Transmission range: typical 10 m – IP 44 only suitable for indoor use. The protection level IP 44 is equipped with the sealing seal ref. 551 WU and “IP 44” frame of the corresponding design series