Description
r String Lights,Enjoy Excellent Lighting Experience
Product Specification:
1. Color: Multi-colored
2. Power source: Solar powered
3. Number of lights: 50 LEDs
4. Solar panel: 1.2V 200mA
5. Charging time: 6-8h
6. Ni-Mh batteries: AA size, 800 mAh, 1 PCS
7. Working time: steady on mode 8-15h; flash mode 10-20h
8. Dimension: 50 crystal balls with the total length about 10 meters
Installation:
1. Please tear off the protective film from the solar panel before using.
2. Assemblle the solar panel to cradle on the anchor spike.
3. Choose a soft ground to push the spike in to locate the light.
4. Turned the ON/OFF switch at the bottom to “ON” position.
5. Press “Mode” to choose a mode (steady-on mode or flash mode).
6. Put the light at the right and safe place.
7. Check whether the panel works well by: leave the unit in the sun for an hour and then cover the complete solar panel. If the lights come on, it works. If NOT, push in the button once again and put the unit in the sun for another hour. Cover the solar panel again and it should light up.
Note:
1. Keep away from fire or other source of heat.
2. NOT immerse it in the water. They are ONLY designed to be protected from the rain.
3. The light bulb is designed as non-replaceable bulb. Do Not attempt to replace any bulb.
4. Since the end point of anchor spike is sharp, please keep away from children under 3 years old.
5. Make sure the switch of the lights is turned to “ON” status; if not, the battery will not be charged.
6. Ensure the solar panel is NOT sheltered from the sun,because it needs to absorb enough energy from the sun.




