Air Filter Regulator, Filter Pressure Regulator, Compressor Moisture Trap, 1/4″ Oil Water Separator Trap, for Air Tools System, Water Pressure Moisture Trap Air Cleaner Tool with Gauge

Description

Installation and use 1, please pay attention to the installation of cleaning pipes and joints, to avoid the stolen goods into the gas road. 2, the installation should pay attention to the direction of the air flow and the direction of the arrow on the body is consistent, pay attention to take over and dental type is correct. 3, the pressure adjustment: the regulator knob up, clockwise rotation, the pressure rise; counterclockwise rotation, the pressure drop. Adjust to the required pressure, the teeth will be pressed to lock the state. 4, the water discharge: no air pressure, the water automatically discharged; with air pressure, the drainage column upward push, water discharge, drainage is completed, the drainage column release, drainage column automatically shells, drainage end. When the water level exceeds the upper limit, please timely drainage, otherwise it will cause dehumidification bad. 5, the amount of oil adjustment: clockwise rotation of the needle, drop the amount of oil; counterclockwise rotation needle, drop the amount of oil increased. Air flow adjustment, set the needle valve, the air flow, large amount of oil; air flow is small, less drop of oil. 6, refueling method: you can not turn off the air pipe and refueling operations, counter-clockwise screw up the oil, the home of the amount of fuel one-time please do not exceed 80% of the cup. After adding the oil will be tightening the oil screw, oil tank can not be unloaded directly when the oil. Maintenance 1, cleaning / replacement filter: remove the filter, with air blowing from the inside out, you can re-use 2, transparent PC Cup: remove the PC cup, with a clean cloth can be wiped, can not use any damage to the PC material of chemicals to clean.