Description
Overview 1.47inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface,Embedded ST7789V3 Driver Comes with examples for Raspberry Pi, Arduino, STM32, etc. Specifications Working voltage: 3.3V/5V (please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly) Communication interface: SPI Screen Type: IPS Control chip: ST7789V3 Resolution: 172(H)RGB x 320(V) Display size: 17.39 x 32.35 mm Pixel pitch: 0.0337(H) x 0.1011(V) mm Product size: 22.0 × 38.5 mm Features At A Glance 172×320 resolution, 262K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32 Comes with development resources (examples for Raspberry Pi/Arduino/STM32) LCD and the controller The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 172(H)RGB x 320(V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used. The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster. Development Resoures https://wwwshare/wiki/1.47inch_LCD_Module?store Packing List 1.47inch LCD Module x1 PH2.0 8PIN cable x1 Note Technical Support is provided , Please feel free to contact us via store message if you have any problem
