Description
Operation Instruction:If electric current exists when it’s with no load, please press the button Seven times quickly to clear the data of electric current(But please do not press the button Seven times continually during process of testing. ) Load Voltage Protection Function: The Threshold Voltage Default Parameter is 35.0V. To adjust the Overload Voltage, please switch to the voltage >35.0 interface; double press on the button to increase 1v while Three click on button to decrease 1V. If the detected voltage is higher than the setting voltage, the test will make a beeping alarm sounds Voltage Protection Function: Switch to the voltage Specification:Voltage measurement range: 3.60 – 30.0 V(0.01 V)Current measurement range:0A-5.1A(0.01 A)Capacity accumulation range:0-99999mAh(0.001 Ah)Electricity accumulation range:0-99999mWh(0.01 Wh)Maximum voltage current: 30V/5.1A(150W)Application:Test Charging Speed & Quality of USB CableTest Capacity and Electric Energy of Power BankCheck the charging performance (charging speed and quality) of the output wall/car/solar panel chargers and USB charging cables, and test capacity and electric energy of power bankIt can be also used to find the highest current output of the Wireless Charger/ Wireless Charging Stand/Wireless Charging Pads:If the USB Tester doesn’t display any parameters, please insert the small adapter being sent with the package into the side hole on the USB Tester, to trigger the PD Charging Function.