2-Pack 30W & 60W PTZlink Gigabit PoE Injector 48V – 52V Active Power Supply Wall Plug Ethernet Adapter, Powerline ,1GB 10/100/1000Mbps POE+ IEEE 802.3af / 802.3at Compliant, Up to 100 Meters UK Plug

$104.99

  • Make sure this fits by entering your model number.
  • Both the PTZlink 30W and 60W Power Over Ethernet Injectors have a single-Port Gigabit Ethernet input and 1 PoE+ Gigabit Ethernet port output offer full-duplex 2Gbps Ethernet speeds.
  • PTZlink 30W & 60W PoE injector follows the PoE standard IEEE802.3af, IEEE802.3at, which is considered to use active PoE. This means that the 802.3af/at injector will check the power coming in and if the power doesn’t meet the device requirements it won’t get powered up, ensuring the safety of the PoE device. Normally, 802.3 af/at/bt PoE voltage will always be 44 to 57 volts DC.
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Networks a PoE device located up to 100 meters (328 ft.) away. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.
  • PoE injector excels in sending data while providing PoE to standard-based PoE, PoE+, and PoE++ compliant devices. In a practical application scenario, a PoE injector functions as an intermediary to connect non-PoE switches and PoE-compliant devices. The devices like IP cameras or WAPs will be powered by the PoE injector.
  • PoE port power supply – PoE vs PoE+ vs PoE++: Make sure your injector’s PoE standard is compliant with your PDs. There are three main PoE standards –802.3af (PoE), 802.3at (PoE+), 802.3bt (PoE++). They support a power supply of up to 15.4 W, up to 30 W, and up to 60 W /90 W respectively.

Out of stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Description

30-watt Power over Ethernet Capability
The PoE in-line power following the IEEE 802.3at/af Power over Ethernet Plus standard makes it able to deliver Ethernet data and up to 30 watts of power to remote PoE compliant powered devices (PDs) over one Cat.5E/6 Ethernet cable. It provides more flexibility in power requirements for all kinds of PDs at affordable installation costs. Designed especially for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) speed-dome camera, high power outdoor AP can be powered and work normally just through a single UTP cable with PoE power injector.

60-watts PoE Injector
It is a Single-Port, Ultra Power over Ethernet Injector with a maximum of 60 watts of power output over Ethernet cables. It is designed specifically to meet the demand for growing higher power required network equipment such as:
 

Specifications

1. Interface: 
 LAN: 1 x RJ45 STP, “Data” Input Port | PoE: 1 x RJ45 STP, “Data + Power” Output Port;
 AC Connector: 1 x AC input power socket.
2. Standard: 802.3af/at
3. Power Requirements:
4. Ethernet Data Rate: 10M/100M/1000Mbps
5. Protection:

Packing List
1 x 30W PoE Injector
1 x 60W PoE Injector
2 x UK Power Plugs

Additional information

Weight 0.8 kg
brand

PTZlink

dimensions


:

18.7 x 13.6 x 9.3 cm; 800 Grams