Description
The length of the arm bands deflated was 18.5cm, and the width 24cm. After inflating, the diameter will be 18 cm and its height is 20 cm. Note: 1.ate the arm bands after covering your arm would have a suitable size 2. NOT inflate the bands too much or you can’t put it on and Do 3. inflate it too less preventing falling off Keep the swimming arm bands from any heater and sharp objects How to use Step 1 Inflate: Squeeze the valve and blow into the 1st chamber until firm. Do not over inflate as this can restrict the movement. Close the valve by firmly inserting the stopper, push the valve into the chamber until flush. Roll the armband to the upper arm, ensuring the valves are against the arm. Step 2 Allow the child to enter the water, holding their hand as they do so, once in the water check the buoyancy. When checking buoyancy the water level should be across the shoulders. If necessary adjust the buoyancy by inflating or deflating. Do not let go of your child until buoyancy is achieved. Step 3 To deflate: Roll the armband off of the child’s arm. Push valve out of chamber, remove stopper and squeeze base of valve to release air. After use rinse in clean water. Do not leave exposed to direct sunlight and do not leave inflated after use.