Description
Feature: The denture teeth and plastic thermal beads can help you cover the missing teeth, allow you to smile confidently, easy to clean, just use the toothbrush to clean the denture teeth. How to use: 1 into hot water With the fitting material attached onto the back of the teeth, drop the teeth into hot water, the water needs to be above 130 degree for the fitting material to soften and become pliable, water from the tap will not be hot enough, you will need to heat it using a microwave or stove top. If the water is hot enough, the fitting material should be soft and pliable after 2 minutes, if the material is not soft after 2 minutes, you will need to use hotter water and try again. 2 the teeth into place Once the fitting material is soft and pliable, gently press the teeth onto the front of your existing teeth, firmly hold the teeth in place and use your thumbs to press any excess fitting material up and around the back of your natural teeth, after 30 seconds gently remove the teeth and set them aside to cool. 3 the fitting material cool and then try them on Once the fitting material has cooled and hardened, you can place the teeth back into your mouth, when fitted correctly they should kind of pop into place. If you are not happy with the fit, you can reheat and refit as many times as you need until you get a secure fit, the teeth stay in place because the fitting material has made an imprint of your existing teeth like shown above. Once you get accustomed to the fitting process, you may want to adjust the amount of fitting material to get a fit that feels right for your mouth. Specification: Material: silicone Package include: 2 x Teeth top cosmetic veneer 1 x 50g Plastic thermal beads