Description
Instruction Step 1:Clean surfaces with mild soap and water before sticking it on. Step 2:Measure the part of the paper to cover. Cut the paper to the proper size, leaving about 3 cm of extra overlap on all edges,which can help you for adjusting. Step 3:While peeling the bottom paper, use a scraper to evenly brush paper from top to bottom,If the paper is found to be deviating during the process, you can peel it and continue to paste it again. Step 4:If there is the bubbles or crease,pierce them with a needle and squeeze the air out. Additional,the heatgun will be helpful,because this is PVC material,the heat can make it plasticity. Step 5:The user’s guide is included with the product. Notes: Tips 1. Color may look different from each monitor. Since computer screens have chromatic aberration, we can not make sure that the color of our products will be exactly the same with the photographs. 2 enough rolls at a time to make sure they come from the same batch to avoid color difference. 3. Paper you will receive may have some wrinkles on it or both ends, but it does not effect looking after use on dry flat surface. Note: To achieve the desired results, attach the paper to the surface of a smooth object. The surface of the object must be dry and free from oil or other stains. Do not apply paper on rough surfaces.