Description
The module concept which is unique to iCON, gives one the option of determining how you wish to control your fan and based on your requirement select the appropriate module. Airflow has invested extensively in the research and development of our modules to bring our customers the most versatile controllability available in the extractor fan market. Our extensive range of control functions has helped the iCON product range become the leading brand it is today same module is compatible with all three size iCON’s – 15, 30 and 60. However, it should be noted that there are specific 240V modules and different low voltage SELV modulesacing a module is also a lot simpler and cheaper than replacing the entire fan two speed humidity and/or pull cord boost module (72675703) is for use in the 230v – 240v iCON 15 (72683501) iCON 30 (72591601) iCON 60 (72591701) only module will give the iCON the functionality of starting at a low speed when activated by a remote switch. It will then boost to the high speed (top speed of the fan it is in) when the humidity sensor is activated. It will carry on extracting at the boost speed until it is below the humidity level set on the module, this is to prevent nuisance triggering. The boost speed can also be activated manually by the integral pull cord, it then needs to be pulled again to go back to the lower speed, alternatively the cord can be detached from the module if not required the module is inserted the low speed needs to be selected depending on the fan, iCON 15 (72683501) should have 8 litres a second and the iCON 30 (72591601) iCON 60 (72591701) should have 13 litres a second module should only be installed by an approved and qualified person and in line with the instructions that come with each module.
1 x Plug-In Module1 x Instructions
