Description
How to use the wireless pager (Need to put the switch to ON): Press the button on transmitter, the receiver will ring after it receives the signal and the LED indicator will be on.
Led torch function: There is a LED on the back side of receiver. Long press melody changing button for 2 seconds, the LED will be one; long press the button again to turn it off.
How to change the melody and How to pair: short press the melody changing button to change the melody; long press (3 seconds) the volume button until you hear Ding (once sound) from receiver; press again the button on transmitter, you will hear Ding Ding (twice sound) from the receiver, the desired melody and pairing is successful.
How to adjust the volume: short press the volume button on the receiver to switch to the higher volume level
Charging indication: When charging, the LED is blue. When full charged, the LED is red.
Problem: Receiver has no response after press transmitter Resolution: 1, Please check if the ON/OFF is at ON position. If not, please push it to ON. 2, Please check if the receiver and the transmitter is paired. If not, please pair them. 3, Please check if battery level of receiver is low, if yes, please recharge the battery. 4, Please check if battery of transmitter is incorrectly installed or has low battery level. If yes please correct the battery or replace the battery. 5, Please check if transmitter and receiver is out of working range or there are too many interference in between. Please make sure they are in working range.
How to replace the transmitter CR2032 battery: Open the shell with a flat-blade screwdriver along the edge of the transmitter, then replace the battery and close the upper shell
Package Included: 1 x Transmitter 2 x Receivers 3 x Hanging ropes 1 x USB cable 1 x English manual