Description
Key Safe Instructions ATTENTION Please read the operating instructions care-fully before you operate the lock or try toset a new combination of numbers. The Key Keeper leaves the factory withnopreset code please note you will need toset your own code before use. 1T OPENING 1.1 Slide the black button marked CIEARdown. 1.2 Slide the silver button marked OPENdown. 1.3 Now you can open the cover and remove it to set your own code. 2. TO SETYOUR OWN CODE 2.1 Please choose your code (minimum3 numbers). 2.2 Remove the white cover byremoving the single centre screw. 2.3 You will see ten small black screws withsmall arrows facing upwards. 2.4 With the small key provided turn thearrows on the screws from facingupwards to facing downward forexample if your code is 1234 the arrows should be facing downward allother arrows should face upward. 2.5 Slide the black button marked CLEARdown. 2.6 Replace the white cover 2.7 Please note always use the CLEARbutton after trying to open the keykeeper. 3 CHECK THE CODE 3.1 Slide the black button marked CLEARdown. 3.2 Type the code in (you can key in yourcode in any order). 3.3 Slide the silver button marked OPENdown. 3.4 Now you can open the cover and addyour keys.