Description
2 Tiers Bathroom Shower Corner Shelf suitable for washroom,bathroom and kitchen. 2 installation methods: No drill or traditional screw drilling, according to the actual situation to choose No drilling installation only suitable for smooth and even surface, like ceramic tiles, Marble. Step1:Clean the wall and keep it dry and tidy. Step 2:Choose a suitable height and mark the installation position with a mark pen. Step 3:Unscrew the nut from self adhesive screws sticker Step 4:let the screw on sticker pass through the hole on aluminum bar and conner shelf in turn, tighten the nut Step 5: Peel the release paper at back of self adhesive screws stickers. Step 6:Put the corner shelf on the wall according to the marked position, then press the sticker to squeeze out air. Drilling installation suitable for uneven surface, like concrete Wall, drywall and painted wall. Step1:Put the corner shelf on the wall and mark the two hole position with a mark pen. Step 2:let the marked black point coincide with one hole on the aluminum bar and mark the position of the other hole on the aluminum bar Step 3:Drill 6mm width hole with an electric drill according to the marked black points Step 4:Hammer the plastic dowels into the holes Step 5:let screw pass through the hole in white plastic gasket, conner shelf and aluminum bar in turn and tighten Step 6:Put the silver decorative cover on the white plastic gasket and finish installation ! Tips: 1se prepare the following tools before installation：Cross screwdriver, Electric drill, Hammer， Measure tape and Mark pen. 2re punching, please make sure that the positions of the 4 marked black points are same as the actual distance of the holes on the conner shelf