Description
Description:
Product name: 10-port SATA3.0 expansion card
Product interface: PCI-E 1X
Product chip: ASM1166
Support system: Windows 8 / 10 / Ubuntu /Linux.
(Synology can only recognize 4 hard drives; WIN7 users are not recommended to buy)
Specification:
Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0
Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.
Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
Support Native Command Queuing (NCQ)
Support FIS based on port multiplier switch or command switch.
Support hot swap.
Compatible with SATA6G, 3G and 1.5G hard drives
Note: PCI cannot be used
Note: RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.
Speed information:
1. Use SATA3.0 data cable to achieve the best results.
(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the faster speed.)
2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.
3. Motherboard BOIS setting: SATA mode should be changed to AHCI.
Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
The fastest speed of PCI-E 2.0 is 380-450 m/s.
Different computer configurations and SATA SSDs have different speeds.
⭐If the detection is incomplete or unstable, please contact us to send the driver.
Packing List:
1* PCIe 1X 10 SATA card
1* Bracket baffle
10* SATA cables
1* SATA power splitter cable