Description
The external casing IB – 235 °C31 continues to a slim design, and a matching, quick USB 3.1 connection for easy handling. In the case, you can a 2.5 HDD or SSD with SATA interface (SATA I/II/III up to 6 GBit/s). The height of the drive must be up to 9.5 mm. Your data is transmitted via a USB 3.1 (Gen 2) connection can achieve a that holds up to 10 Gbit/s. The maximum data transfer is however thanks to the SATA 6Gb/s interface. But the combination than enough to ensure current SATA SSDs and hard drives by their power limit. Suitable for USB 3.1 connection is the full hard outer body with a USB Type C. Cable you need. The type c connector is rotation and pluggable on both sides. In addition to this, it is also 3 Compatible and is compatible with Thunderbolt 3 Thunderbolt ports. The USB cable is attached on the housing, built in, so it is at your fingertips and have it to hand. The cable is not necessary, it can be hidden in a small compartment in the case. So the length of the cable is approx 8 cm (3 inch)The grey/transparent casing is made of high quality plastic and for installing into a HDD or SSD No tools is required. When setting is the full hard outer body by clip and lock closure on the front of the short. The 2.5 inch HDD/SSD will now be inserted into the housing and the SATA interface. A snap closure provides support and stability Built-in drive additional foam padding. Power is drawn directly from from your USB port. We use the operating systems Windows, Mac OS and Linux Supports and plug & play and hot swap. A status LED for reveals information about use and being accessed.