Additional information
| Weight | 3.81 kg |
|---|---|
| brand | CGOLDENWALL |
| dimensions | 41 x 20 x 19.6 cm; 3.81 Kilograms |
CGOLDENWALL 1500W Open-Cover-Stop Electric Grain Grinder 300g Stand Type 28000RPM High Speed Superfine Grain Mill Cereal/Spice/Herb/Powder Grinding Machine- Overload Protection- Commercial Motor CE
$216.99
- ? [OPEN COVER STOP DESIGN]- With OPEN-COVER-STOP safety design, CGOLDENWALL upgraded grain grinder will automatically stop operation when its cover is opened, largely enhancing operation security. (Also means that without its cover properly locked, the grinder will not start. Learning how to lock the cover: https://mube/watch?v=efQmUF86u0U&feature=youtu).
- ? [SUPERFINE POWDER& HIGH SPEED GRINDER]- Power: 1500W; Speed: 28000r/min; Fineness:70 to 300 Mesh; Crush Level: Superfine Crush. →The pure copper commercial motor with 1500W power& 304 stainless steel sharp blades ensure 300g grain grinder can achieve a high speed up to 28,000rpm, except extremely hard material takes 2-3min to grind, normal grains only needs 10-30s to be ground into 70 to 300 mesh superfine powder, contributing to higher working efficiency.
- ? [OVERLOAD PROTECTION AIR SWITCH&TIMER]- When the grain mill is in an overloaded state, the overloaded protection air switch will pop up automatically to stop the operation, protecting the grinder from being damaged. Besides, the machine is also equipped with a 0-5 min timer for setting grinding time according to your needs.
- ? [APPLICABLE DRY MATERIAL TO BE GROUND]- ①various dry GRAINS (soybean, flax seeds, sesame, red beans, coffee beans, black rice, corn, wheat, barley, oats, buckwheat, etc.), ②dry SPICES (star anise, cinnamon, pepper, etc.) ③dry HERBS (ginseng, astragalus, medlar gelatin, notoginseng, etc.) ④other dry materials (not oily nuts, bird seeds, pet feed, etc.) NOTE: Materials with HIGH OIL CONTENT like walnuts are not suggested to be ground as they may stick to the blades when grinding.
- ? [TIPS FOR OPERATION] – 1. Please dry the wet material before grinding; 2 cover of the grinder must be closed correctly before operation so that the machine works normally; 3 amount of one-time grinding should be between covering the long blades and 2/3 capacity of the crushing bin; 4. Rest the machine for 5-10 minutes after every 5 minutes operation; 4. Please use brush or wet rag to clean the crushing bin instead of water.
Out of stock
