Description
Specifications:
Dual Clamping servo horn:
1.Teeth Number : 25T
2.Overall Size : 35 x 15 x 6mm/ 1.4 x 0.6 x 0.24in
3.Geared HoleInner Dia. : 6mm/ 0.24in
4.Small Hole Dia.(Each) : 2mm/ 0.08in
5.Material :Aluminium
6.2 bolts for securing the split-clamp onto the servo output.
7.Suitable for Futaba, Ace or TowerPro MG servo.
Round Type Servo Arm Horn:
1.Number of teeth: 25 Tooth
2.Material: CNC Aluminium Mounting
3.With 4 Thread Hole: M3
4.Mounting Hole Spacing: Approx. 14mm/0.55in
5.Flower tooth diameter: 5.5mm/0.21in
6.Body Diameter: Approx. 20mm/0.78in
7.Thickness: Approx. 4mm
8.Applicable servos: suitable for standard servos with a size of about 40x20x36mm/1.57×0.78×1.41in
9.Each disc steering arm come with 4 fastening screws for fixing, several angle fixed, stronger than other servo.
Double Sided Servo Horn:
1.Overall length: 47mm/1.85 Inch
2.Thickness: 7.5mm/0.3 Inch
3.Hole Center Distance(Measured From Hole Center To Hole Center): 20.2mm/0.79 Inch; 12mm/0.47 Inch
4.Mounting Aperture: M3 x 0.5
5.Material:Aluminum
6.The horn has two holes for linkage mounting on both sides, allowing you to quickly and easily change the linkage angle.
Single Servo Horn:
1.Scale: 1/8 1/10
2.Overall length: 28mm/1.1Inch
3.Thickness: 7.5mm/0.3 Inch
4.Material:Aluminum
5.Hole Center Distance(Measured From Hole Center To Hole Center): 19.5/0.76in
6.Quality upgrade steering horn with locking bolts to prevent slip caused by plastic gears.
7.25T spline for Futaba and new Hitec standard.
Package includes:
1xDual Clamping servo horn
1xRound Type Servo Arm Horn(with M3 Screw)
1x Double Sided Servo Horn
1x Single Servo Horn
1xM3 Hex Wrench