Description
DCSk 10m – 4mm² – Red cable for cars type FLRY-B asymmetrical, suitable for temperatures from -40°C to +105°C – Made in Germany! High quality 4 mm² cable, for cars, with reduced coating thickness for space-saving installation. FLRY Type B. DCSk presents Vehicle power cable with asymmetric wire (type B) to provide greater flexibility, thanks to a greater number of thin single wires of 0.26 mm, which make the cable highly flexible and durable. Annealed ECu copper conductor according to DIN EN 13602, bare, with asymmetrical structure, conductor structure according to ISO 6722, together with a soft thermoplastic PVC sheath, with properties according to ISO 6722, class B, lead-free and Shore hardness Sh90. Technical information: – ECu electrolytic copper conductor wire, bare – Nominal section: 4 mm² – Cable outer diameter: 3.40 – 3.70 mm – Diameter of copper conductor Ø: 2.75 mm – Single core diameter Ø: 0.31 mm – Electrical resistance at 20°C: 4.7 mΩ/m – Insulating coating thickness: 0.32mm – Temperature range: -40°C to +105°C – Insulation: polyvinyl chloride (PVC)- Made in Germany Useful information on the cross-section of the cable and how it can be measured: The cross-section of a cable defines an area and therefore the value is expressed in square millimeters (mm²) and not the diameter of the cable. The area of the cross-section cannot be measured with a gauge, but is obtained with the following formula: (Diameter of individual wires)² * (Number of wires)/4 *3,14, which is then the area of the cable and then expressed in square millimeters.