Description
how to install?
1. Turn the indoor screen toggle switch to “ON” to turn it on, and press and hold “M”
button, the screen shows “Connecting…30” and goes into pairing mode. 2. Press and hold the doorbell button at the same time, the working light flashes.
3. When the inside screen shows “Connecting…✔”, pairing is successful.
Product features:
4.3-inch IPS display
Infrared Night Vision
Built-in speakers
Built-in microphone
Wireless Installation
Two-way video intercom
Full Perspective Display
Auto Video Recording
Automatically store photos
Product parameters:
Viewing angle: 70°
Screen: 4.3 inch
SD card: supports up to 256GB (Note: shipped without card)
Night Vision Type: Infrared Night Vision
Operating temperature: -10°~60°℃
Audio information: built-in speakers, microphone
WIFI mode: 2.4G private protocol
Power information: DC5V 2A
Doorbell Battery Capacity: 800MA
Display Battery Capacity: 1000MA
Charging time: about 2 hours
Note:
1. The device is a low-power doorbell. When no one rings the door, the device goes into standby mode.
2. Walls, windows, metal doors, etc. will weaken the signal strength. Please try to install the device in a strong signal range.
3. Before use, pair the doorbell with the indoor screen and install it in an effective area.
4. If the monitor is too close to the doorbell, it will echo, please move it away or turn down the volume and the noise will disappear.
5. The applicable operating temperature of this product is -10℃~50℃. Please do not use this product in an environment where the temperature is too high or too low.
6. This product is a precision electronic product. Please do not use this product in excessively humid environment or water can penetrate the product, so as not to affect its normal use.
7. In order to better use this product, the front and side of the lens should be kept away from glass, white walls and other reflective objects, so as not to make the image bright up close, dark or white from afar.
Packaging:
1 x electronic doorbell.
1 x display.
1 x bottom cover.
2 x double-sided stickers.
1 x pack of screws.
1 x USB charging cable.
1 x manual.




