ENC 28J60 Ethernet LAN Network Adapter Module for Raspberry Pi Zero Board

$37.99

  • Make sure this fits by entering your model number.
  • The Pi zero Enc28j60 is a simple Network Adapter module for Raspberry Pi zero.
  • Adapter allows for Raspberry Pi zero to access the network smoothly, and it is easy to do system updates and software installation operations.
  • However, most of operations are based on linux’s command line via ssh service, so a Network Adapter is required.
  • Easy to assemble, easy to setup, official OS overlay support, stable and fast.
  • Due to the Linux system for Raspberry Pi Zero, the Pi Zero without NIC is inconvenient.

In stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Description

Specifications: Compatibility: pi0 piw Size: 6.5×3cm/2.5×1.1in Weight: 19g(approx.)How to configure it: 1. Install the NIC module into for raspberry Pi. 2. Connect the network cable to ensure that your router supports DHCP and works well. 3. Burn the Raspbian image to TF card. 4. Edit the /boot/config file by your favorite editor such as “nano” or “vim”, and add the following parameter:  dtoverlay=enc28j60 Then save the exit and reboot for raspberry Pi.  NOTE: The module is tested only in raspbian environments. How to check if network adapter works well: Open a terminal and typing this command:  ifconfig Package Includes: 1 × Enc28j60 Network Adapter Module 

Additional information

Weight 0.02 kg
brand

YWBL-WH

dimensions


:

6.5 x 3 x 1.8 cm; 20 Grams