Description
WET is a consolidating protective agent for stone and rough agglomerates with wet effect, it reduces water and oil absorption on the materials it is applied on while consolidating their surface. The advantages of using FILA WET:- It provides a pleasant wet effect, protecting from stains and consolidating the material.- The wet effect it provides can be calibrated based on the number of applied coats.- It does not yellow in any environmental and ageing condition.- Does not peel off TO USE ITNo dilution:ready for useication:1. On a dry and clean surface, apply one coat of [WET] in an even and continuous manner using a paintbrush. 2. Repeat the operation with the same method after 24 hours.3. For very absorbent materials, a third coat may be required to achieve the desired wet effecttenance:diluted solutions of CLEANER PRO. In the areas most exposed to weathering, it is recommended to apply the product again every two yearsDOne litre of product covers:10/20 m2“Yields are approximate and are considered per coat”Attention:Do not apply the product outdoors if rain is forecast within 24 hours not walk on the floor while it is drying: wait 24 hours after applying the last coat not apply on terracotta floors, brick facings, porous stone or polished and smooth surfacesIn the event of incorrect application and when complete, thorough cleaning is required, remove [WET] by using [NOPAINT STAR] product cannot be applied on surfaces with issues due to rising damp and in humid environments with standing water (showers, saunas, Turkish baths…).
Synthetic resins dispersed in aromatic hydrocarbon solvent