Description
Description: This All In One Laminate Wood Flooring Installation Kit has all the items you need to install or repair your laminate flooring or vinyl plank flooring. Plenty of spacers for long planks, nice sized tapping block and right sized mallet with a nice grip,a helpful kit for a faster and efficient laminate floor installifications: Color: Orange, BlackDouble Headed Hammer: Head Size: 8.5cm Diameter: 3cm Handle Size: 27cmPull Bar: Material: Manganese Steel Length: 30cm Width: 7.2cmTapping Block: Material: PC Length: 17.5cm Width: 6.5cmSpacers: Material: Plastic Length: 6cm Width: 3cmHow to use this floor installation kit? Step 1. Spacers are used between the wall and the flooring to allow for natural expansion of wood products. The spacers have “serrated” edges that lock them into the correct position once a board is placed against them. Step 2. Start by placing the long edge of tapping block against flooring. With a hammer, gently tap the other long edge of the tapping block to push the flooring together to form a tight fit. It can be used with both adhered and glue less laminate or hardwood floating flooring systems. Step 3. Place the short end of the pull bar down so the lip hangs down over the end of the flooring panel With the tall end pointing up use a hammer and gently tap the tall section pulling the flooring togetherage List: 1 x Double-Faced Hammer 1 x Flooring Installation Pull Bar 1 x PC Plastic Tapping Block 1 Pair x Protective Foam Knee Pads 40 x Flooring Wedge SpacersNOTE: 1. It is recommended that you have to be careful that the tapping blo