Description
Specification: Pin Power Supply: 5V Supply voltage tolerance: +/- 5% When not on the passive power: Yes TxD dominant: Yes The minimum bit rate: 60kbit / s 3.3V I / O compatibility: Yes Size: 22 * 11 mm / 0.87 * 0.43 inch(L * W ) TJA1050 has two operating modes: high-speed mode, silent mode. High-speed mode High-speed mode is the normal operating mode, the pin S connected to ground can enter this mode. Since the S pin internal pull-down feature so that when it is not connected, high-speed mode is the default mode of operation. In this mode, the bus output signal has a fixed slope, and to try to quickly switch, this model is suitable for large bit rate and a large bus length, but this time its transceiver small cyclic delay. Silent mode In silent mode, the transmitter is disabled. So it does not matter TxD input signal. Thus, the transceiver operates in a non-transmitting state. It is at this time the supply current consumption as in a recessive state when the pin “S” then high, you can enter silent modeing List: 1* TJA1050 CAN the controller interface module the bus driver interface module