Lithofin MN Colour Intensifier for Natural and Artificial Stone 1-10 Litres

Description

A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). This ready-to-use siloxane impregnator is solvent based and contains special colour intensifying componentserties:Lithofin MN Colour Intensifier penetrates into the surface rendering it water repellent while at the same time intensifying the colour without producing any gloss. Surfaces appear more colourful and fresh – “wet effect”. The water resistance reduces the sensitivity of the surface, largely preventing staining and facilitating maintenance. Lithofin MN Colour Intensifier does not form any layers, thereby maintaining the surfaces water permeability. The slip resistance of the surface is hardly affectednical Data:Density: approx. 0,85 g/cm³Appearance: liquid, colourless, clearOdour: aromaticpH-Value: n.ah Point: >25°CSolubility in Water: not solubleField of Use:For adding lustre to wall and floor surfaces, stairs, entrance areas, terraces, etc. which appear bland and colourless. Suitable for indoor and outdoor use. Surfaces: all absorbent, porous natural stones (e.g. granite, gneiss, porphyr, marble, limestone, slate, etc.) and engineered stones with rough, sawn, honed and flamed surfacesse Note: for protecting polished and very finely honed natural and artificial stones, we recommend Lithofin MN Stain-Stopctions for Use:The surface to be treated must be completely dry and clean. Where no prior experience exists or in cases of doubt, try the product in an inconspicuous area prior to use.  Evenly apply a consistent amount of Lithofin MN Colour Intensifier with a clean brush, a roller or a cloth. On highly absorbent surfaces, this procedure may have to be  repeated after five minutes. The product should saturate the stone without drying on the sur