Description
M.2 NVME To USB Adapter, SSD To USB3.1 TYPE-A Plug in adapter card
Features:
Support SSD： M.2 NVME Protocol SSD （only support PCIe x2 and PCIe x4 NVME, M.2 NGFF SSD，not support PCIe x2, PCIe x4 AHCI M.2 NGFF SSD，not support B+M key SATA, M.2 NGFF SSD）
Chip: RTL9210 TYPEC 3.1，support nvme pcie m2 in the market
Chip advantages: the main controller is low power consumption, and the temperature of the main controller is lower than that of the old jms583, and the current consumption is also much smaller. That is to say, the high temperature of nvme SSD is relatively reduced. At the same time, the data test we get shows that the same SSD and the same device are tested with jms583 / rtl9210, and the latter is about 200MB / s faster than the former
External interface: usb3.1 type-A plug-in interface is downward compatible with USB3.0 and USB2.0 interfaces (supports USB2.0 and 3.0 interfaces, of course, you can run 2.0 and 3.0 when you connect 2.0)
Read speed: 1000mb / S (this data is for reference only) the actual read speed is mainly related to SSD and devices, and the test results of different SSDs with the same device are not the same.
Product details:
Size:110mmX24mm
Gross weight：13g
Package included:
1. Transfer card X1 as shown in the figure
2. Heat dissipation silicone patch x1
3. Screw driver x1