Description
ORNO WE-514 Energy Monitor Display unit in metric units (kWh) is used for direct measurement of the active power in a single-phase system. A special electronic system generates pulses proportional to the current consumption under the influence of the flowing current and the applied voltage. The power consumption in the phase is indicated by a flashing LED. The number of pulses is converted into consumed energy and their value is shown on an LCD display (5+1). Power supply: 230V~, 50Hz, base current: 5A, max. current: 40A, min. current: 0.25A, pulse frequency: 1000 Imp/kWh, accuracy class B, DIN TH-35 mm DIN rail mounting. The energy is measured according to EN50470-1:2006, EN50470-3:2006 of the MID 2014/32/EU directive. ORNO WE-514 Power Meter Technical data ✅ Type:Single-phase ✅ Port: RS485 ✅ Communication protocol: MODBUS ✅ Supply voltage: 230V~, 50/60Hz ✅ Basic current (lb):5A ✅ Maximum current (Lmax):40A ✅ Minimum current (Lmin):0,25A ✅ Frequency of pulses:1000 imp/kWh ✅ Accuracy class:B ✅ Compliance (2014/32/EU): yes ✅ Display:6+2 ✅ Pulse output: yes ✅ Number of modules:4.5 ✅ Protection class:IP51