Description
Important Note: 1. Must make sure that the CM4 module is correctly installed on the expansion board before powering on. 2. Raspberry Pi Compute Module 4(CM4), heatsink and TF card is not included in the packing list. 3. USB-A and USB-AF/USB-C ports cannot be used at the same time. The USB-AF and USB-C power supply ports can be used at the same time. 4. CM4 module with emmc does not need to insert TF card, TF card is only needed for CM4 Lite models. [Overview] This CM4 Raspi Compute Stick is an IO expansion board designed for Raspberry Pi Compute Module 4 CM4. Provides a variety of expansion interfaces for the CM4 module, including upgrade interfaces, 20pin GPIO expansion, CSI, full size HDMI2.0, TF Card slot, USB2.0, Type-C, 4PIN cooling fan port, etc.. With a small and compact size, it is can be adapted to variety of applicantion. Supports to use with Geekworm 12mm aluminum heatsink C235 for your CM4. [Specification] 1 x Full-size HDMI 2.0 Interface 1x USB-A: OTG USB (used to upgrade and update Raspberry Pi Compute Module 4) 1x USB-AF: USB 2.0 High Speed Interface 1x USB-C: 5V/3A Type-C Power Port TF Card interface: Micro SD Card Slot (only supports CM4 module that without eMMC) GPIO: 20Pin GPIO Expansion Interface 1x fan interface: 4P/1.25mm Fan Control Interface(Not support pwm fan speed adjustment) 1 x CSI camera FPC connectors (22-pin 0.5mm pitch cable) 1x Boot Switch System Startup Switch Interface (used when upgrading the system) 1x Reboot Button Working Temperature: 0℃~80℃ PCB Dimension: 70x45mm [Packing List] 1 x Raspi Compute Stick IO board for CM4