Description
Specification:Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi’s own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins software development, either Raspberry Pi’s C/C++ SDK, or the MicroPython is available. There’re also complete development resources and tutorials to help you get started easily, and integrate it into end products quicklyures:Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz264KB of SRAM, and 2MB of on-board Flash memoryCastellated module allows soldering direct to carrier boardsUSB 1.1 with device and host supportLow-power sleep and dormant modesDrag-and-drop programming using mass storage over USB26 × multi-function GPIO pins2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channelsAccurate clock and timer on-chipTemperature sensorAccelerated floating-point libraries on-chip8 × Programmable I/O (PIO) state machines for custom peripheral supportDual-Core Arm ProcessorDual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz26 × Multi-Function GPIO PinsConfigurable Pin Function, Allows Flexible Development And IntegrationPackage Includes:1 * Raspberry Pi Pico with pre-soldered header x11 * 3PIN yellow pin header1 * Breadboard1 * USB-A to micro-B cable 1 * Jumper wires x1 Sensors Pack