Description
This receiver is compatible with the following summer 868MHz remote controls: Summer 4020, 4026, 4031, 4011, Aperto 4025 4035, Pearl Status S10448-00001, S10448-00012; Pearl V. 4019 ibe 40V000, 4019V001, 4019V003, 4019V021; Pearl 4018V000, 4018V001, 4018V003, 4018V020; Pearl Twin S10019-0001, Slider Vibe S1. 0202-02000001, Slider+ S10305-00001
Frequency switch: plug in the jumper for 434mhz summer remote controls, take off the jumper for 868MHz summer remote controls.
Channel 1 programming process:
Press the learning button once. The LED1 lights up. Press the button you want to program on the remote control, the LED will flash. This means that the remote control has been successfully programmed.
Channel 2 programming process:
Press the learning button twice. The LED2 lights up. Press the button you want to program on the remote control, the LED will flash. This means that the remote control has been successfully programmed.
Delete all remote controls: hold down the learning button until the LED is for approx. 8 seconds fast flashing. Press and hold the learning button until the LED goes out. All remote controls are permanently erased and cannot be restored.
Operating temperature: -20 °C + 70 °C. Dimensions (L x W x H): approx. 109 x 55 x 34 mm.
If you want to increase the range of the remote control reception to 150-200 metres, you can connect this antenna: https://www.store.de/dp/B01MZYAPVN/