Description
-2Port POE Repeater
Specification:
1. PoE input: 1 RJ45 port
2. PoE output: 2 RJ45 ports
Input Power: 30W max
Output power: 15W max
Transmission rate: 10/100/1000Mbps
Network medium: Cat5, Cat5e, Cat6, Cat6e, UTP cable (less than 120m)
Chip solution: RTL8367N-CG +SD4923E
Standard/protocol: IEEE 802.1Q, IEEE 802.1x, IEEE 802.1w, IEEE 802.3af/at
Network medium: 10BASE-T: unshielded category 3, category 4, category 5 twisted pair (maximum 100m)
100BASE-TX/100BASE-T: unshielded category 5, twisted pair above category 5 (maximum 100m) 1000BASE-TX/1000BASE-T: Category 6 or above twisted pair (maximum 100m)
Interface: 1 10/100M /1000M RJ45 port (Auto Negotiation/Auto MDI/MDIX)
Cascading: the output port is cascaded Switching capacity: 6Gbps
feature:
1. This PoE extender is not a PoE switch, it must be connected to a PoE switch/PoE injector to work
2. This is a high-performance, low-power 10/100/1000Mbps trunk extension repeater, which is the primary choice for small and medium-sized LANs. It provides two 10/100/1000Mbps ports, plus one 10/100/1000Mbps UP LINK port, which can be used to connect upstream devices with higher bandwidth.
3. Support standard POE and non-standard input. Store and forward technology is used to ensure that the bandwidth is effectively allocated to each port. Full wire-speed Gigabit connection to a workgroup or server,
4. Plug and play, this kind of flexible non-blocking architecture, users can use it without being limited by bandwidth and media network.
5. The expander supports half-duplex and full-duplex working modes. Each switch port supports self-adaptive function. The port adopts store-and-forward mode. networking solutions