Description
How to use?:
1.Keep the surface clean.
2.Apply a sufficient amount of threadlocker agent at the end of the screw.
3.After applying the thread lock blue agent, tighten the nut to the locking agent position in 3 minutes by adjusting the angle, no further adjustments after curing.
4.Wait for 20 minutes for the initial curing, and 24 hours after the complete curing, which prevents loosening and rust and corrosion.
Packing List:
Medium Thread Lock (Blue)x 50ml
High Strength Thread Lock(Red) x 50ml
Note:
1. Shake well before use to ensure uniform composition.
2. Ensure that the parts used are clean, dry and free from oil and dirt.
3. This product must be in full contact with air to prevent solidification. That is why the bottle is only half full of liquid.
4. This product is not suitable for use in pure oxygen or oxygen-rich environments, nor can it be used as a sealing material for hydroxide substances.
5. This product is not suitable for bonding and fixing, please familiarise yourself with the range of materials that this product is suitable for.
6. Please seal immediately after use to prevent the active ingredients from evaporating. 7. Do not pour the unused to avoid contamination of the original glue.
8. Please store in a cool place at room temperature, avoid sunlight and high-temperature environment.