Description
Package include:
1x Relay Receiver board
2x Transmitters (contain battery)
1x Product manual
Parameter:
-Receiver Working voltage: DC 5V~24V
-Quiescent Current: <10MA
-Max current: 1A
-RF frequency: 433MHz
-Working temperature: -30~+80
-Receiving Sensitivity: >107dbm
-Amount of storage remote controls: 15 pieces
-Support encoding: 1527 Leaning code
-RF Operating mode: ASK superheterodyne wireless reception
-Receiving range: Open space is about 30~50 meters
– Operating mode: Momentary /Toggle/ Latched Mode
-Battery: 2x CR2016(included)
Usage(Operation Mode):
Momentary Mode:
1. Press and hold on button “▲”, the motor will rotate forward;
2. Release the button, this motor will turn off.
Toggle Mode:
1. Press button “▲”, the motor will rotate forward;
2. Press button “▲” again, this motor will turn off.
Latched mode:
1. Press button “▲”, the motor will rotate forward;
2. Press button “▼”, this motor will rotate reverse.
3. Press button “▄”, this motor will turn off.
Reset:
Press the learning button (on the Receiver) 8 times. succeed.
Note:
After reset, all the remote controls cannot work any more.
Setup
1. Press the learning button (Pressing 1 time for Momentary mode, Pressing 2 times for Toggle mode, Pressing 3 times for Latched mode). Wait for 3 seconds;
2. Press button “▲” . Wait for 3 seconds.
3. Press button “▼” . Succeed.
Note: All the product are set up in toggle mode before shipping. If you want to change the operation mode please reset firstly.