Description
This replacement part for roller shutter allows you to articulate the crank rod. The gimbal is an indispensable part for the exit of the box. It is used in the roller shutter mechanism, with the guide offset to allow the correct rotation of the crank and the transmission of movement to the roller shutter shaft. The so-called gimbal or ball joint, is made in France and is the ideal solution to replace a damaged or worn gimbal to rotate trunk axles and connecting rods that tend to tip due to friction. Dimensions: the universal joint is made of a diameter of 12 mm or 1/2 inch and a different inlet for 6P7 hex shaft and is made of steel for a long time. When useful for roller shutter parts, it has many different uses for different mechanisms, making it a universal accessory. The finish of this knee brace is white and is made of metal alloy for a long time. Suitable for most manual mechanical pull roller shutter systems for single hole windows, traditional shutters or renovation. This accessory is sold with 2pcs M4 and M5 screws per piece.