Description
Remove the single security screw located on the button of the unit:
Proceed to unscrew the top and bottom screws:
To get started, remove one screw from each corner:
Remove the rear cover:
Remove the rear cover by pulling it directly away from the main body:
Remove all of the security:
Gently guide the cable down and out of its socket:
Remove the single screw holding the button in place:
Notice the small notch on the side of the button holder:
Carefully insert the small spring back into the rear of the button:
Feed the button ribbon cable through the gap of the housing, seat the button back into place:
Connect the battery and capacitor cablesback into their respective sockets:
Reconnect the battery and capacitor cables to their respective sockets:
Secure with the two black screws:
Secure with the back panel:
R