Description
43D – Fixed Operating Temp of 43 degrees. – used as a heat source in electric towel rails, electric radiators and dual fuel towel rails.
Terma Heating Element, Silver
$0.00
- The Terma 43D element is pre-programmed to run at an internal temp of 43c, for Low Surface Temp (LST) style operation* When specifying this element, to help ensure correct surface temp, reduce the output of your radiator (as water) by 40% (i.e. for a 200w towel rail install the 120w element).
- No Timer. 2hr drying function. Compatible with external Timer as remembers settings when off. 66mm length from thread down. 55mm diameter clock shaped face. 315mm internal probe length.
- Frost & overheating protection. Straight cable, no plug. IPx5 (safe for use in bathroom). Class 1. Wattage Selection Advice: To correctly choose the right wattage of element for your towel rail or radiator, you should look at the output of the chosen radiator as central heating (hydronic) in watts and choose an element with the wattage closest to that figure. If the output of the chosen radiator is only listed in BTUs, the conversion formula is BTUS / 3.41 = Watts.
- Electrification Advice: When electrifying any radiator check it is suitable to work with a heating element. Dual Fuel Advice: If you are buying a heating element to convert a towel rail for use as dual fuel it is important to remember to regularly bleed it as air can build up inside. A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels.
Out of stock
Additional information
| Weight | 0.59 kg |
|---|---|
| Brand | Terma |
| EAN | 5901804567001 |
Terma Heating Element, Silver
$409.99
- The Terma MOA Blue element provides a choice of internal temp (30c to 60c) or ambient room temp (15c to 30c) regulation. 7 day Timer. 2hr drying function.
- 66mm length from thread down. 55mm diameter clock shaped face. 315mm internal probe length. 1x Buttons: Power. Full operational control of the element on smartphone/tablet via Bluetooth (with Terma BLUE-Line App: IOS/ANDROID). Frost & overheating protection. Lot20 Eco-design Directive compliant (electric radiators needing adaptive start control).
- Straight cable, no plug. IPx5 (safe for use in a bathroom). Class 1. Wattage Selection Advice: To correctly choose the right wattage of element for your towel rail or radiator, you should look at the output of the chosen radiator as central heating (hydronic) in watts and choose an element with the wattage closest to that figure. If the output of the chosen radiator is only listed in BTUs, the conversion formula is BTUS / 3.41 = Watts.
- Electrification Advice: When electrifying any radiator check it is suitable to work with a heating element. Dual Fuel Advice: If you are buying a heating element to convert a towel rail for use as dual fuel it is important to remember to regularly bleed it as air can build up inside. A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels.
Out of stock
Additional information
| Weight | 0.59 kg |
|---|---|
| Brand | Terma |
| EAN | 5901804595936 |
Terma Heating Element, Silver
$316.99
- The Terma KTX 4 Blue Controller is designed to work in combination with the TS1 Element probe to provide a fully functioning heating element. Provides a choice of internal temp (30c to 60c) or ambient room temp (15c to 30c) regulation.
- 7 day Timer. 2hr drying function. 82,5mm length from thread down. 67mm wide square shaped face.
- 4x Buttons: Power, Drying Function, Temp +/-. Full operational control of the element on smartphone/tablet via Bluetooth (with Terma BLUE-Line App: IOS/ANDROID). Frost & overheating protection. Straight cable, no plug. IPx5 (safe for use in a bathroom). Class 1.
- Lot20 Eco-design Directive compliant (electric radiators needing adaptive start control). Guarantee: 2 Years.
In stock
Additional information
| Weight | 0.35 kg |
|---|---|
| Brand | Terma |
| EAN | 5901804361272 |